Submersible Grinder Pumps

APPLICATIONS

Ideal for grey and black water pumping, sump emptying, septic effluent and sewage disposal and pumping of waste water with soft solids in suspension.

FEATURES & BENEFITS

• Able to pump soft organic solids, sanitary products, thin rubber products and even some textiles in suspension, by shredding to a slurry

• Open impeller prevents blockage of the pump by small solids in the slurry

• High heads and small solids allow connection to small discharge pipe systems, especially suited to pumping waste water to pressure sewer mains

• Silent operation

• Quick and easy installation

• Hose tail supplied with every pump

• Low maintenance

• Fully repairable

• Mounting feet with rubber cushions fitted for a firm and stable positioning during installation and operation for D75G/GA, DT08G, D120G/A, D150G/A, DT12G & DT15G.

• Adaptable to slide rails – see accessories 

PUMP :

• Heavy duty shredding and grinding ring at inlet

• Centrifugal design, open impeller

• Double Mechanical shaft seal in oil bath

• Hard faced Silicon Carbide/Ceramic seal on pump side

• Sand slinger lip seal for added protection

• Oring casing sealing

• Corrosive resistant stainless steel and quality heavy duty powder coated cast iron pump parts 

MOTOR :

• 2 pole, 2900rpm 50Hz 240V single phase or 415V three phase

• Submersible with IPx8 enclosure

• Class F insulation

• 10 metre HO7RN-F oil resistant power lead and seal sensor lead fitted with bared wire lead ends for easy connection to power supply terminations

• Seal sensor leads fitted for easy connection to a protection relay to enable timely repairs prior to motor damage. Not fitted to D75G/GA or DT08G models

• Protected against both high operating temperatures and high current by a built in automatically resetting thermal overload