Mukmova Effluent Pumps
EFFLUENT MOVER
APPLICATIONS
Ideal for pumping water containing solids in suspension, such as effluent water, dairy or piggery waste, liquid food transfer, bentonite sludge and sawdust muds.
FEATURES & BENEFITS
MUKMOVA :
Semi vortex open vane impeller
Solid cast iron casing and impeller
Mechanical seal is grease packed with grease nipple
Inspection cover held by two wing nuts
Choice of 240 / 480 volt single phase and 415 volt three phase, 50Hz models
Single phase models are capacitor start/capacitor run design
Automatic resetting motor overload in all single phase models
Oversized motor used, with ample power reserve
Davey manufactured TEFC, IP56 motor
JUMBO MUKMOVA :
Robust cast iron casing with thick walls for longer pump life
Open impeller design allows for high solids passage (up to 25x40mm) with little chance of blockage
Internal armoured volute plate made of nodular cast iron to resist the abrasive and corrosive action of liquids even with solids in suspension
The armoured volute plate is fixed to the casing without screws for fast and easy removal
Self-priming action allows the pump to prime without the need to fill the pipe and to be operated without a foot value to reduce the risk of blockages
Large priming and drain plugs for fast filling and draining of the pump casing
Comes with companion flanges for easy installation of piping