HP Water Pressure System with Torrium2
HORIZONTAL PRESSURE PUMP WITH CONTROLLER
APPLICATIONS
Ideal for pumping clean, non-volatile liquids without fibres or solids in such applications as household water supply, irrigation, water transfer, washing systems and pressure boosting.
FEATURES & BENEFITS
The HP Series Pressure Systems, consist of an HP pump fitted with a Torrium2 controller. The Torrium2 is supplied connected electrically to the HP pump motor for :
Easy non-tradesmen installation and assembly
Positive safety under varied weather conditions
The combination of the high pressures supplied by the HP pump and constant flow control provided by the Torrium2, enables consumers to enjoy the benefits of a strong comfortable shower from a pump that does not cycle, plus the reliability of adaptive technology. The complete HP Pressure System is compact and quiet providing for :
Easy installation, especially where space is at a premium
Non-intrusive operation, for consumer enjoyment
All parts of the entire system that are in contact with the water are manufactured from safe, corrosion resistant materials for :
Consumer confidence that their water supply will be as good coming out as it was going into the system
Ability to use the HP pressure system on a variety of water qualities
PUMP :
Reliable twin stage impeller design
All stainless steel construction for reliability and the ability to pump hot water up to 50°C
Carbon/Ceramic mechanical seal for reliable pump operation
MOTOR :
TEFC motor constructed from corrosion resistant materials
IP55 international protection rating for a high level of resistance to dust and liquid entry
Voltage variants:
- 220-240V, 50Hz, 2 pole
- 220V, 60Hz, 2 pole (/P models)
Class F insulation
Higher than normal 50°C ambient temperature rating for longer life and improved tolerance to voltage variations for peace of mind, even on the hottest days.
Protected against both high operating temperature and high current draw by a built-in, automatically re-setting, thermal overload
Permanently split P2 ‘fail safe’ capacitor design
Motor and pump are designed for frequent starts